Skip to product information
1 of 1

MAI Chemical Supply

Velocity Long Throw Random Orbital Polisher - 21mm Throw

Velocity Long Throw Random Orbital Polisher - 21mm Throw

Regular price $240.00
Regular price Sale price $240.00
Sale Sold out

S.M. Arnold VLT-021 Velocity LT 21mm Long Throw Random Orbital Polisher

The SM Arnold Velocity LT for Professional and Novice Detailers 

The Velocity LT Random Orbital Polisher 21mm long-throw buffing orbit provides more pad rotation, more work per pass and absolutely amazing results with unparalleled polishing effectiveness!

The 21mm long throw orbit has an 168% increase over the standard 8mm throw orbital polisher making it the perfect choice for large surface areas and panels. The engineering required to balance the polisher throwing a pad around at 21mm is more complex than accomplishing the same with an 8mm tool. 

The Velocity Polisher's complex high-tech engineering is top-of-the-line. It provides efficiency and smooth balance. You will spend less time buffing and accomplish more without increased vibration.

The Velocity LT Random Orbital Polisher’s is super efficient due to its powerful 75 watt, 7.5 amp motor, 2200 to 5200 orbits per minute (OPM), reduced machine noise and minimum vibration.

The Velocity LT Long Throw Orbital Polisher comes with 2 ergonomic handles to ensure your hand-grip comfort and precise paint correction even on curved surfaces as you buff. The Right Angle Handle can be installed on either side of the DA Polisher or use the D-Handle that is also included.

Why the Long Throw Polisher is Better than the Traditional 8mm DA Polisher

The Velocity Long Throw Orbital Polisher accomplishes higher levels of correction in less time without the need for extremely high speeds, forced rotation, etc. Very little downward pressure is necessary so it is less tiring to complete your buffing and polishing job.

Electronic Speed Control

The Polisher electronic speed control supplies the following features:

Speed Setting: The speed of the polisher can be set by rotating the speed dial to the desired setting for any speed between 2,200 and 5,200 orbits per minute (OPM).

Speed Compensation: In case of overloading the polisher, the electronic speed control will compensate and maintain the selected speed at a safe level. (Exceeding this overload level may result in strong vibrations and tool overheating)

Soft Start Acceleration Ramp: To avoid kickback effect and compound splattering, the electronic speed control always supplies a smooth starting acceleration ramp when the Polisher is turned on.

Accidental Re-start Protection: In case of a sudden lack of main power supply, the electronic speed control prevents the re-start after the power supply is restored if the main switch is turned on. The polisher must be turned off and on again pushing the lever of the switch towards the body of the polisher.

Features and What’s in the Box

  • Powerful 750 Watt, 7.5 AMP motor 
  • Premium BOSCH Bearings 
  • Soft Start Trigger Throttle Allows Precise, Incremental Speed Control 
  • Near-Instant Start-up 
  • 21mm Long Throw Orbit 
  • Orbits per Minute: Min 2200, Max 5200 
  • Right-Angle Handle and D-Handle 
  • Non-Marring Composite Body 
  • Precision Machined Counter Balance for Silky Smooth Operation 
  • 2 Interchangeable Vented Flexible Urethane Backing Plates: 5" and 6" (the 6” is installed on the polisher) 
  • 13' Silicone Rubber 16 AWG Power Cord with Cord Support Rubber Fore Grip 
  • Hexed Mid-Body Grips, and Pistol Grip Quick Access Brush Side Ports Includes Allen Key Wrench, Replacement Carbon Brushes, Washer Modification, and Grease Tube 
  • Quick Access Brush Side Ports
View full details