Collinite No. 476s Super Doublecoat Paste Wax

Collinite No. 476s Super Doublecoat Paste Wax

  • $22.99


Collinite No. 476s Super Doublecoat Paste Wax

Collinite’s No. 476s is Collinite’s most durable classic carnauba/polymer blend. Holds up month after month against harmful outdoor corrosives; UV, rain, snow, salt, dust, dirt, grime, bugs, staining and more. Ideal as a winter wax when both lasting shine and all-season/all-conditions protection are equally crucial. Handcrafted and handpoured in the USA.

Features:

  • Enhances look and appearance
  • Preserves and protects condition of finish against weathering
  • Contains no abrasives or cleaners 

Recommended Applications:

  • Car, truck, boat, bike, RV, aircraft, personal watercraft, snowmobile, ATV, tractor/farm equipment, golf cart, snowplow.
  • Exterior gel coat, fiberglass, clear coat, single stage and lacquer paints and highly finished wood.
  • CLEAN, unblemished painted/unpainted metals; chrome, stainless steel, aluminum, copper, and brass
  • NOT recommended for rubber, non-skid, black trim, vinyl, glass or non-painted plastic.

Directions:

  1. Do not apply in direct sunlight and surface should feel lukewarm.
  2. Prepare clean surface via wash and decontamination (As needed also compound/polish/panel wipe)
  3. Apply VERY sparingly in a thin manner to clean dry surface no larger than 2 Sq. Ft. at a time with microfiber applicator
  4. When wax begins to dry/haze up - Buff off with Slogger side of the Microfiber Madness Dusting Diamond OR with a Microfiber Madness Yellow Fellow 

Specifications:

  • Coverage: Depending on finish and conditions, one 9 oz tin for every 10-18 mid-sized cars. 
  • Product consistency: Hard Paste 
  • Sizes available: 9 oz

Precautions:

  • Store product at room temperature away from fire or flame
  • Discard product if exposed to frozen temperatures
  • Keep cap or lid on product when not in use
  • Do not alter product’s composition or original packaging in any way 
  • NOT for use on Rubber, black trim, vinyl, glass or non-painted plastic
  • Use in a well-ventilated area with protective eyewear and gloves

Additional:

  • Applicator pads and removal towels should be clean, free of residue and changed frequently
  • Only apply to a CLEAN surface; washed, and free of blemishes, discoloration or other imperfections like swirls or scratches. A clean/properly-prepped surface will ease the application/removal process; improving spread and increasing durability of wax’s bond.
  • Do NOT apply wax to entire vehicle, or sections larger than recommended before removing, as prolonged drying or cure times may lead to wax hardening on surface; causing streaking or difficulty for some users to remove properly. User assumes risk if recommended cure times are exceeded.
  • Drying times may vary based on conditions (air and surface temperature, humidity, wind, sunlight etc).
  • Avoid applying in direct sunlight, or extreme temperatures (over 80 degrees F or less than 55 degrees F). Surface temperatures should be, or feel lukewarm-room temperature to the touch. Do not apply if surface feels cold or hot to the touch.
  • Safe to use with machine buffer if experienced. Check machine manufacturer’s speed/pad specifications for last step protective waxes that contain no cleaners, abrasives or filling agents.
  • To further maintain the look and durability of the waxed finish between wax applications, use a car wash soap that is pH neutral and gentle on the paint with no grease-cutting properties. These soaps facilitate a streak-free shine while helping to preserve the applied wax. Avoid heavy detergents or low-grade soaps