PRO CLEANSE BC

PRO CLEANSE BC

  • $29.99


Brushless | Free and fast rinsing | Spot free drying | Safe on paint and glass | Biodegradable Surfactants

 

PRO CLEANSE BC is designed to deep clean multiple surfaces, including brick, limestone, granite, concrete, EIFS, vinyl, siding, roofs, awnings and fiberglass. When used on exterior surfaces, it will remove oxidation and other unwanted soils. Pro Cleanse BC is most effective as a building restoration cleaner, and is often used as a secondary rinse to neutralize acid restoration cleaners. When used on concrete, Pro Cleanse BC will remove carbon, oil, tire and other stains. It will brighten the concrete following removal of soils, giving a fresh look. Pair with Pro Restore 21 for full restoration of masonry surfaces.

PRO CLEANSE BC can be used with a pressure washer, brush or low-pressure sprayer application using either hot or cold water. Protect adjacent and surrounding surfaces not intended to be cleaned.

DIRECTIONS FOR USE
PRO CLEANSE BC must be diluted before use. Optimum dilution of this product is 1 part chemical to 4 parts water, creating a ready to use solution when applied up or down stream with a pressure washer or low pressure spray applicator.

Suggested Dilutions

Dilutions vary based on the severity of the stain and type of surface.
Heavy soil- use product as is (after initial 1:4 dilution)
Medium soil- 1:10
Light soil/Brushing - 1:20
Coverage rates will vary from 100 - 250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining.